Okaysou Apollo 718 Review

Pros

• Great cleaning performance
• Good coverage for price point
• 30 day trial period

Cons

• Lacks auto mode
• No remote control via remote or app

Scoring

Purification Test

To test the Okaysou Apollo 718, we set up the air purifier in a medium sized room in our office. I took a baseline measurement before starting the test to measure the current air quality. Then, I let the Apollo 718 run on the highest setting for 1 hour and measured the air quality again.

We can then compare the difference between the starting baseline and the post-run data to determine the performance of the Okaysou Apollo 718

After the 1 hour test, the Okaysou Apollo 718 removed 97.5% of airborne particulates from the medium-sized room we tested in (~14’x10’).

The Okaysou Apollo 718 improved PM2.5 air quality by 96.2%

In order to get these measurements, we used the Temtop LKC-1000S+ professional air quality detector. This device allows us to get precise readings and performance bearings before and after the test. 

Below, we’ve included information on the testing criteria and what defines good vs. bad air quality. 

Overall, the Apollo 718’s performance was great to see. While I would like to see the PM2.5 and PM10 reduced to 0.1, 0.2 is still a fantastic result. 

The Filters

Inside the Apollo 718 lies a 3-in-1 filter that includes the following:

• Pre-filter
• HEPA filter
• Carbon filter

The pre-filter is designed to capture large airborne particulates like pet hair.

Next, the H13 True HEPA filter acts as the main line of defense, capturing particles as small as 0.3 microns.

Finally, the activated carbon filter removes VOCs and reduces odors. 

Noise Test

We also tested how loud the air purifier was while running. We perform this test by having the air purifier run on the different modes and use a sound meter to measure noise level. We tested the Okaysou Apollo 718 from about 3’ away. 

Our results showed the following decibel levels from each mode.

With a noise range from 20-37 dB, the Okaysou will generate noise similar to the sound of a quiet library at the loudest. In our tests, we found the sleep mode and the lowest power setting to generate a similar amount of noise. The only difference being if the display light on the device is on or off. 

Common noise levels:

• 20 dB – rustling leaves
• 30 dB – whisper
• 40 dB – quiet library, babbling brook
• 50 dB – refrigerator, moderate rainfall
• 60 dB – normal conversation, dishwashers
• 70 dB – traffic, showers
• 80 dB – alarm clock, telephone dial tone

Usability Test

The Apollo 718 lacks a lot of the bells and whistles we see with more expensive air purifiers, however, what it lacks in features it makes up for in performance and simplicity. Because of this simplicity, the device has few accessories.

Here is what is in the box:

• Apollo 718 Air Purifier
• H13 True HEPA filter (pre-installed)
• Manual & Warranty information

Setup

With few included accessories, the Okaysou Apollo is incredibly easy to set up. Just make sure you remove all packaging from the device, plug it in, then turn it on. 

Controls

The Apollo 718 does not have app connectivity or an included remote. To control the device, users will need to interact with the touch physical touch panel on the device.

With the controls you can:

• Turn on/off device
• Adjust fan speed
• Toggle preset timers (2h, 4h, 6h, 8h)
• Toggle display light
• Check filter life
• Toggle sleep mode

The Apollo 718 does not have an auto mode, however, the inclusion of timers and a sleep mode are pleasant surprises. 

Maintenance

Maintenance for the Okaysou is straightforward. The pre-filter is washable, and the HEPA filter will need to be replaced over time.

Okaysou recommends changing the filter every 6-8 months, however filter mileage will depend on use and surroundings. Generally, we find HEPA filters need to be replaced every 6-18 months.

Size & Dimensions

The Okaysou Apollo 718 is a small sized device that is light-weight and easy to move around. 

Here are the exact dimensions of the Okaysou Apollo 718:

• Length – 13.8”
• Width – 8.5”
• Height – 17.3”
• Weight – 8 lbs.

In terms of coverage area, Okaysou states that the Apollo can cover 300 sq. ft. in 15 minutes and up to 800 sq. ft. in one hour. It has a CADR of 130 CFM, which can circulate the air in a 430 sq. ft. room 2 times in one hour. 

Specifications

Specifications
Manufacturer	Okaysou
Model	Apollo 718
Width	8.5″
Height	13.8″
Weight	8 lbs.
Filters	HEPA, Carbon
Wifi Compatible	No
Room Coverage	800 sq. ft.
CADR	130 CFM
Returns	Varies by retailer
Warranty	2-years
Price	Check Price

Should you buy the Okaysou Apollo 718?

I would recommend the Okaysou Apollo 718 if you’re looking for the following features:

• Simple air purifier with great performance: The Okaysou Apollo 718 is an air purifier that just works. It forgoes new features for simplicity and fantastic cleaning performance. In our tests, the Apollo reduced PM2.5 and PM10 to 0.2 and removed 97.5% of air particulates. 
• Great coverage on a budget: The Apollo 718 has an impressive coverage area of up to 800 sq. ft. in 1 hour. It achieves this with a CADR of 130 CFM that can circulate the air in a 430 sq. ft area 2 times in an hour. All of this coverage comes at a low cost, while still providing excellent performance.
• 30-day trial and 2-year warranty: If you are worried about whether or not the Apollo fits your needs, you can try it out for 30-days with no commitment. That way you can decide if it will work for your home, room, or wherever you need an air purifier. Additionally, it comes with a 2-year warranty just in case.

For more information or to buy the Okaysou Apollo 718 click here.